cargo lift supplier in Europe
WIZ Cargo lift has been exported to more than 50 countries,including European countries like Finland,Sweden,Norway,Denmark, Estonia,Poland,Czech Republic,Hungary,Germany,Austria,Switzerland,United Kingdom,Ireland,Netherlands,Belgium,France, Greece,Italy,Malta,Spain,Portugal etc.Until now,we got satisfied feedback from different cargo lift platform projects.Now,we would like to introduce more details information about cargo lift,hope it can help you improve efficiency in your life or works.
What is a cargo lift?
The cargo lift is also named as freight elevator,goods lift,lift tables.There are a few types belows:
Cargo Lift Main model
Model |
Load capacity |
Lifting height |
Platform size |
power |
Loading direction |
CL0.5-2.8 |
500kg |
2800mm |
1200x1200mm |
2.2kw |
1200mm |
CL1-5.5 |
1000kg |
5000mm |
1600x2500mm |
3.0kw |
2500mm |
CL3-3 |
3000kg |
3000mm |
2500x5000mm |
4.0kw |
2500mm |
CL5-10 |
5000kg |
10000mm |
7500x2000mm |
5.5kw |
2000mm |
CL10-15 |
10000kg |
15000mm |
3300x6000mm |
7.5kw |
6000mm |
Note: Load capacity, lifting height, platform size, voltage all can be made as customer requirement. |
The cargo lift is a kind of lifting and lifting mechanical equipment, which can be manually operated by the buttons of the control system, so that the goods can be transported to the upper and lower floors. According to the type of freight elevator, it can be divided into: scissor type elevator and guide rail type elevator. The lifting height of the goods lift varies from 1 meter to 20 meters, and special specifications of the elevator can be customized according to user requirements. It is mainly used for high-altitude cargo transportation up and down in factory assembly lines, cargo warehouses, parking lots, docks, construction, logistics, etc. The lifting system of the freight elevator is driven by a hydraulic pump station, so it is also called a hydraulic freight elevator.
Cargo Lift Introduction:
Hydraulic lift freight elevator, what are the components of the lift freight elevator?Specifically summarized as follows:
1.Shaft part:
The closed or reticulated frame surrounded by buildings or light steel structures, with steel guide rails installed on both sides of the interior;
2. Drive part:
The small fuel tank with hydraulic components such as hydraulic drive motor, oil pump, safety valve, speed control valve and reversing valve;
3. Oil cylinder part:
The cargo lifting cylinder is composed of one or more cylinders of the straight top platform or the lifting scissor frame;
4. Cargo Lift Door system part:
Closed or mesh platform door or landing door system composed of steel structure, with manual door and automatic door, generally open platform does not have doors:
5. Goods Lift Electrical part:
Including power, control, signal, safety and lighting and other devices:
6. Cargo Lift Platform part:
The steel structure platform for carrying heavy objects, with closed or open type, with guide rollers or guide shoes on both sides, and the bottom of the platform can be connected to a lifting oil cylinder or a lifting scissor-shaped steel frame:
7. Goods lift Auxiliary parts:
Hydraulic pipe fittings, pipes, pressure gauges and steel structure bases and other components:
8. Safety device:
Safety valve, limit, door electromechanical interlock, rupture valve, emergency switch and electrical short circuit protection, etc.
Cargo lift advantages:
The hydraulic lift cargo elevator is a series of freight elevator products created for the terminal market segment based on our company's complete hydraulic equipment technology development platform to meet the individual needs of different situations. In recent years, cargo elevators have been widely used in enterprises, factories, warehouses, logistics centers, supermarkets, parking lots, stations, airports and other places. After being put into the market, the hydraulic lift freight elevator is very popular. Now, as a lift manufacturer, WIZ will explain to you what stability advantages the hydraulic lift freight elevator has?
Firstly,Freight elevator security and stability advantages:
Hydraulic freight elevators are equipped with the safety devices of traditional traction elevators and are equipped with the following devices:
1. Goods lift Safety valve: prevent the system pressure from being too high when moving upstream
2. Emergency manual valve: When the power is cut off, it can make the car emergency drop to the floor position, open the hall and car door, and make the passengers get out of the car safely.
3. Manual pump: When the system fails, the high-pressure oil can be pumped out through the manual pump to lift the car to the floor position.
4. Pipeline rupture valve: When the hydraulic system pipeline is ruptured and the car stalls and descends, the oil pipe is automatically cut off and the descending stops.
5. Oil tank temperature protection: When the oil temperature in the oil tank exceeds the standard set value, the oil temperature protection device sends a signal to suspend the use of the lifting platform, and starts when the oil temperature drops.
Secondly, the advantages of civil construction:
1. There is no room above the hoist way, and the top floor can be installed above 3.5 meters.
2. The machine room is located within a radius of 15 meters of the shaft, and covers an area of only 3-4 square meters.
3. The hydraulic lift freight elevator is not equipped with a counterweight device, which improves the utilization rate of the well area.
4. The load and load of the hydraulic lift freight elevator directly act on the oil cylinder in the foundation pit, and the shaft strength is low. Can adopt brick-concrete structure or brick-concrete structure.
Thirdly,Operating cost advantage:
1. Low failure rate: Due to the advanced hydraulic system and good control methods, the operating failure rate of the lift can be reduced to a relatively low level.
2. Low power consumption: When the lift table descends, it is driven by the pressure generated by its own weight, which greatly saves energy.
What are the main issues we should pay attention to when buying a hydraulic lift table?
As a professional cargo lifting platform supplier, WIZ insists on producing lifting equipment that meets national standards and EU standards. You can take a look at the comparison of our equipment with others.
WIZ Guard Rail
WIZ Cylinder Other supplier Cylinder
WIZ Shot Blasting Progress
WIZ Powder Coating Progress Other supplier Manual Painting Progress
Factory price warehouse vertical guide rail hydraulic customized cargo lift is produced by advanced manufacturing technology.
When purchasing a freight elevator, customers should make an implementation plan according to their own needs through preliminary research, technical consultation, and on-the-spot inspection and comparison after selecting the manufacturer of the elevator. In order to clarify equal rights and obligations, they must sign a contract with the manufacturer. In the contract for the sale of lifts and freight elevators, several clauses are implemented by the user side, and some users are quite critical of this, but they do not know that these issues are beneficial to users:
1. Construction of freight elevator foundation: The technical department of the production side draws a foundation map according to various parameters and transmits it to the user, and builds a standard foundation according to the drawings.
2. Necessary installation tools: There is such a clause in the freight elevator purchase contract, the user provides the necessary installation tools, this is because we are limited by the transportation conditions, such as electric welding machines, scaffolding and other large tools are too troublesome to transport and return after use. To be shipped back to the company, the user provides better.
3. When the elevator arrives at the site, it is responsible for unloading the truck: It is stipulated in the contract that the transportation is the responsibility of the manufacturer and the unloading user. Mainly because of our limited conditions, it is impossible to bring too many people to the site, and it is inconvenient to rent unloading tools. .
4. Material selection criteria for hydraulic freight elevators: In order to meet customer requirements and not to falsify, the materials and models used should be written into the contract to protect the legitimate rights and interests of consumers.
How to install cargo lift table in Europe?
First of all, you need to choose a supplier who can provide professional technical services and installation services.
No matter you from Middle east areas,Europeans or Americas,for other questions you want to know about cargo lifts, you can feel free to contact us. As a professional manufacturer, we are happy to provide you with lift solutions.As mentioned,as a Chinese cargo lift supplier,we have sold our lifts to many countries.You can also see or buy Chinese cargo lift/ goods lift in UAE,Spain,Vietnam,Indonesia,Philippines,Bangladesh,Singapore,Australia,USA,Canada,Colombia, Venezuela, Ecuador, Peru, Bolivia, Brazil,Chile, Argentina, Uruguay etc.We'd like to share some cargo lift projects feedback from our customers:
If you have any cargo lift projects we can help,just contact us for a FREE Design! Inquiry Now!