What are the reasons for the low working efficiency of the hydraulic lifting platform(cargo elevator lift)?

1. Valve of cargo elevator lift

When using the cargo elevator lift, have you noticed that when the hydraulic oil moves through various valves and tubing on the hydraulic lifting platform, there will inevitably be the loss of pressure and flow, and these losses are all related to the selection of hydraulics Is it reasonable? The pressure of the pressure valve of the other adjusted hydraulic lifting platform can also reduce the power loss. The pressure valve should be as low as possible, as long as it can meet the normal operation of the hydraulic lifting equipment.

2. Hydraulic oil for the cargo elevator lift

Due to the high mobility of hydraulic oil, when it moves in the tubing, the more you move forward, the greater the viscosity of the oil. When the viscosity is too high, greater internal friction will occur, and the hydraulic oil will heat up and generate heat. Activity resistance increases, and system power decreases. When the viscosity of the hydraulic oil is too low, it will simply cause leakage and reduce the volume power of the system. So choose the oil with the right viscosity and better temperature. In addition, the hydraulic lifting platform pipeline is too long and too many bends will increase the pressure of the hydraulic oil along the way and part of the pressure loss. It is recommended to pay special attention to this when planning the pipeline of the lifting platform.

3. Voltage used for the cargo elevator lift

The voltage in the application place is unstable, which will burn the electrical components of the equipment operation box, causing the lifting platform to be uncontrollable. In addition, frequent voltage instability will directly burn the motor. If the motor burns out after the hydraulic lifting platform rises, the pressure system fails. Some small factories produce lifting platforms without loss-of-pressure maintenance, anti-falling maintenance, over-pressure maintenance, and malfunctions. Display and other safety equipment will cause the lifting platform to fall, leading to the onset of safety accidents.